Mineral oil products (Stanhope Seta)
Conradsen Carbon Residue Apparatus, manual
Measurement of coke remainder to determine carbonisation tendencies of mineral oil
Technical Data
Dimensions (H x W x D): 23 x 18 x 18 cm
Weight: 2.1 kg
H2S Analyser
Determination of Hydrogen Sulfide in Fuel Oil
Technical Data
Measuring Range: 0-250 mg/kg H2S (0-250 ppm H2S)
Viscosity Range: up to 3000 mm2/s
Test Duration: 15 Minutes
Sample Volume: 1ml, 2ml, 5ml (depending on H2S concentration)
Dimensions (H x Wx D): 52 cm x 29 cm x 57 cm
Weight: 15 kg
Mains: 100/240 V, 50/60 Hz, auto-sensing universal power supply
MFT Multi Filtration Tester
Determination of filter blocking tendency (FBT) of fuels, gas oil, gas turbine fuel, kerosene, diesel, biodiesel and biodiesel blends.
Technical Data
Filter blocking tendency (FBT) range:: 1.0 to 30 (low value is better)
Filterability quality factor (FQF) range:: 100 to 1 (higher value is better)
Max. pressure: 200 kPa
Dimensions (H x W x D): 350 x 300 x 400 mm
Weight: 9.8 kg
Mains: 110/240 V, 50/60 Hz, 300 W
Cold Filter Blocking Tester (CFBT & CSCFBT)
Technical Data
Pump Capacity: 20 ml/min (adjustable in software)
Temperature Range: -5 ºC to +40 ºC
Dimensions (H x W x D): 355 x 520 x 540 mm
Weight: 15 kg
Mains: 82-262 V, 45-65 Hz
Salt-In-Crude Analyser
A portable instrument for determining the chloride (salts) content of crude oils
Technical Data
Conductivity range: 0.0 to 430.0 g/m³, Resolution: 0.1 g/m³
Temperature Range: -20 °C to 150 °C, Resolution: 0.1 °C
Dimensions (H x W x D): 20 x 7 x 3.5 cm
Weight: 1.6 kg
Mains: 9 Volt DC battery or power supply single phase 110/120/220/240, 50/60Hz
Destillation Apparatus
For testing gasoline, diesel, heating oil, aviation fuel, raw gasoline, solvents and similar products.
Technical Data
Distillation range: RT to 400 °C
Condenser Tank Volume: 7.2 Liter
Dimensions (H x W x D): 47 x 37 x 25 cm (Condenser) / 47 x 21 x 21 cm (Distillation unit)
Weight: 12 kg
Mains: single-phase, 110/120V or 220/240V, 50/60Hz (switchable)
BBR Bending Beam Rheometer
Test System for Determination of Flexural Creep Stiffness of Asphalt Binder at low temperatures
Technical Data
Test Temperature Range: -35 to +30°C
Resolution: ± 0.01 K
Force Range: 0 … 1962 mN
Dimensions (HxWxD): 750 x 980 x 580 mm
Weight: approx. 100 kg without accessories
Mains: 230/240 V, 50/60 Hz, 115 V, 60 Hz (optional)
Ring and ball tester, automatic
Automatic determination of the softening temperature of bitumen, bituminous mixtures, resins and thermoplastic adhesives
Road Tar Viscosimeter
Determination of the outflow time of bitumen and bituminous binders through a nozzle with a sample of 50 ml at 40 °C
Technical Data
Weight: 25 kg
Dimensions: 450 x 500 x 850 mm (Single place device)
Netzanschluss: 220 V, 50/60 Hz